- Joined
- Dec 24, 2016
- Messages
- 244
- Reaction score
- 74
- Age
- 52
Hey Guy's I am in the middle of my new build (first one also) it is a Neato (Talon)
I'm running:
Lumenier LUX V2 FC
Lumenier 20A 4 in 1 esc
Frysky XM+ receiver
Armattan OOMPH 2206 2300kv motors
Ok, onto the problem..In betaflight when it is connected and battery plugged in (using motors tab) all motors spin up really nice no issues!
As soon as I try to arm it (via switch) No motors spin at all upon flipping switch until I start to throttle up and only motor #1 spins until the throttle is 1/4 to 1/2 then the other motors start to move slightly.
I have checked and changed to a bit shorter bolts going into the motors,calibrated the esc's in BlHeli suite,and checked all connections and they look good.
Any Ideas?
Thank's
Mark
I'm running:
Lumenier LUX V2 FC
Lumenier 20A 4 in 1 esc
Frysky XM+ receiver
Armattan OOMPH 2206 2300kv motors
Ok, onto the problem..In betaflight when it is connected and battery plugged in (using motors tab) all motors spin up really nice no issues!
As soon as I try to arm it (via switch) No motors spin at all upon flipping switch until I start to throttle up and only motor #1 spins until the throttle is 1/4 to 1/2 then the other motors start to move slightly.
I have checked and changed to a bit shorter bolts going into the motors,calibrated the esc's in BlHeli suite,and checked all connections and they look good.
Any Ideas?
Thank's
Mark