Bind qx95 eachine drone I'm new iv git a jumper t lite can anyone help me please

[kenzi]

 

[kenzi]

I got it to bind DSM on the jumper t lite motors span then stopped nothing but the blue light stopped flashing once binded cheers

 

[koklimabc]

It seems to be needed to set in cli first with value "set spektrum_sat_bind" to either "9" or "5" in progress start to bind. set to 0 after bind is completed.

• Within the CLI type:

• set spektrum_sat_bind = 9 - for DSMX
• set spektrum_sat_bind = 5 - for DSM2
• Type save, your flight controller will now reboot. Once it has rebooted, remove the USB cable to power off the flight controller.
• After a second, reconnect the USB cable and your receiver should flash (indicating it is in bind mode)
• Turn on your R/C controller while holding the bind button (on the controller).
• Once the binding is complete, the LED on the receiver should stop blinking.
• Now connect back to BetaFlight and you can confirm it is bound by going to the receiver tab, and you should see the bars moving when you move your R/C controller sticks.
• Now you need to turn off bind mode on your receiver. To do this go back to the CLI and type set spektrum_sat_bind = 0
• Type save to apply the settings. The board will reboot and now have completed the binding process

as refers from "How to Bind Spektrum Satellite Receivers on BetaFlight for Beginners"

 

[kenzi]

Thank you so much I will try that just a thing I can't download cleanflight I don't have a chrome os and when I tried betaflight I pressed connect no ports would open do I need to change the settings to connect and would I need a earlier betaflight yeah so cleanflight I can't get it frustrating cheers.

 

[kenzi]

Iv got on clean flight can you help me set it up the drone and jumper t lite please it works it's an old clean flight I don't have a clue what to do cheers appreciated