Hello Pilots, (Hope this is right place for thread) I'm binding the DJI fpv v2 goggles and the fpv remote controller to the caddx vista. I had no problems with the goggles but can't seem to bind the RC to the caddx? The RC is fully charged and I followed the instructions on how to bind the RC to the Caddx with no luck. I did notice that when I turn on the RC I get the blue light for about 5 seconds then it turns solid red? Is it suppose to do that? Any help will be appreciated.
Can't Bind DJI FPV Remote Controller to Caddx Vista
- Thread starter FPV Flier
- Start date
I have the FPV (larger) black box transmitter that you are looking for.
It's brand new in the box and never used. And it's FoSa
I went a different way.
On to another issue... which dji goggles are you working with? The FPV racing model or the one that looks like fly-eyes?
CV Bird
Chula Vista/San Diego County/California/USA
It's brand new in the box and never used. And it's FoSa
I went a different way.
On to another issue... which dji goggles are you working with? The FPV racing model or the one that looks like fly-eyes?
CV Bird
Chula Vista/San Diego County/California/USA
Attachments
Hello Pilots, I have the problem all sorted out now. All three components are now binned. I had to mash the red bind button on the goggles several times to get it to set in the bind mode. Don't know why but that is what I had to do to? All is well now and I won't to thank all those who replied. Happy and Safe flying.
SkyPath Drones
New Member
- Joined
- Dec 30, 2021
- Messages
- 4
- Reaction score
- 0
Hi there,
If the Caddx Vista firmware has been updated then you will need to DOWNGRADE the Firmware if using the older DJI GOGGLES and not the ones that come with the vista. Use firmware version V01.00.06.08 instead.
BAM!!! All fixed.
Fly hard!!!
JT
Similar threads
