Hello, i have been wanting to build a drone and didn't know where to start. After a small bit of research i came up with the following components. Can someone with experience give the list a look over and tell me if this setup will do or not?
============================================
Frame: ImpulseRC Alien 6" Frame
Flight Controller: Matek F722-SE Flight Controller
ESCs: T-Motor F55A Pro II 4-in-1 ESC
Motors: T-Motor F40 Pro IV 2400KV Motor (x4)
Propellers: Gemfan 51466-3 Hurricane Propeller (x4 sets)
Battery: Tattu R-Line Version 3.0 6S 22.2V 1050mAh LiPo Battery
Charger: ISDT D2 200W Dual-Channel Smart Charger
Transmitter: FrSky Taranis X9D Plus SE Transmitter
Receiver: FrSky R-XSR Receiver
Video Transmitter: TBS Unify Pro32 HV VTX
Camera: Foxeer Predator V5 Micro Camera
Antennas: TBS Triumph Pro (RHCP)
GPS Module: Matek Systems GPS Module M8Q-5883
OSD: Matek Systems OSD Module
FPV Goggles: Fat Shark Dominator HDO 2 FPV Goggles
============================================
============================================
Frame: ImpulseRC Alien 6" Frame
Flight Controller: Matek F722-SE Flight Controller
ESCs: T-Motor F55A Pro II 4-in-1 ESC
Motors: T-Motor F40 Pro IV 2400KV Motor (x4)
Propellers: Gemfan 51466-3 Hurricane Propeller (x4 sets)
Battery: Tattu R-Line Version 3.0 6S 22.2V 1050mAh LiPo Battery
Charger: ISDT D2 200W Dual-Channel Smart Charger
Transmitter: FrSky Taranis X9D Plus SE Transmitter
Receiver: FrSky R-XSR Receiver
Video Transmitter: TBS Unify Pro32 HV VTX
Camera: Foxeer Predator V5 Micro Camera
Antennas: TBS Triumph Pro (RHCP)
GPS Module: Matek Systems GPS Module M8Q-5883
OSD: Matek Systems OSD Module
FPV Goggles: Fat Shark Dominator HDO 2 FPV Goggles
============================================
