- Joined
- Jun 22, 2020
- Messages
- 176
- Reaction score
- 132
- Age
- 43
Hi, just stumbled across this forum so thought I'd introduce myself and get involved on here. I started to build an interest in this hobby when lock down began and started to scope out the kit before ordering some items back in May. I decided FPV was for me instead of your regular aerial stuff as I've been so impressed with some of the pro footage you see. Wow those guys make it look easy!
So I went with a TinyHawk 2 BNF as a liked the idea of 1S and 2S and the prop guards. I didn't go RTF as I wanted to select my own controller and goggles and ended up going with the Taranis Q-X7 (FrSKy) and the Eachine E800D as they have built in diversity capabilities. I've done some hours on the SIM and plenty of real flight time in and outdoors. I've managed to start doing basic pitch and roll 360 flips in acro mode but I'm struggling to progress any further than this now. Kind of hit a wall on progress.
I've also got a question on my goggles. I'm transmitting at 200mw over R-4 and don't seem to get any feedback but the goggles seem to produce dots where bright white backgrounds are. This seems to be fine when the unit is fully charged but seems to get worse as the battery drains on the goggles itself. Here is a vid if you can advise or suggest what this might be.
Here's another vid on the same setup but with fully charged goggles with no dots but I'm also having issues with the sound. There seems to be a lot of feedback and you can only just hear the motors in the background quite faint.
Thanks and look forward to becoming an active member on the forum
So I went with a TinyHawk 2 BNF as a liked the idea of 1S and 2S and the prop guards. I didn't go RTF as I wanted to select my own controller and goggles and ended up going with the Taranis Q-X7 (FrSKy) and the Eachine E800D as they have built in diversity capabilities. I've done some hours on the SIM and plenty of real flight time in and outdoors. I've managed to start doing basic pitch and roll 360 flips in acro mode but I'm struggling to progress any further than this now. Kind of hit a wall on progress.
I've also got a question on my goggles. I'm transmitting at 200mw over R-4 and don't seem to get any feedback but the goggles seem to produce dots where bright white backgrounds are. This seems to be fine when the unit is fully charged but seems to get worse as the battery drains on the goggles itself. Here is a vid if you can advise or suggest what this might be.
Here's another vid on the same setup but with fully charged goggles with no dots but I'm also having issues with the sound. There seems to be a lot of feedback and you can only just hear the motors in the background quite faint.
Thanks and look forward to becoming an active member on the forum