tyro 99 black screen - video signal problem

[drmegu]

Hi,

I built a tyro99 recently. I have a problem regarding my VTX signal.

As you might know, the FC has terminals for the camera and the VTX - I connect the camera to the FC and VTX at the same time as usual. But I cannot get image on my goggles or other signal receiver - I get black screens. At the moment the white - audio cable is connected to the VTX directly and I get that signal but not video.

I connected the video signal directly to the VTX without connecting it to the FC and I got image on the goggles. But I would like to get the OSD info and don't know why it is not doing it other way. I get black screens, even though I get audio. Please see images below. I appreciate any help you can give me. Cheers.

 

[drmegu]

Used the pads instead of terminals. Worked.

 

[Cawfpv]

Hey take the power wire from camera and splice it into the power for the vtx. The camera needs 7volts to power it and the plug in is 5v. The vtx power is 10v which worked for me. I had this problem and doing this fixed it