Recent content by Biker

No worries Dan, I thank you for your help ~Biker

how bout this one? Spektrum SRXL2 DSMX Serial Micro Receiver, SPM4650

Hi Dan, Ok, then I think in order to avoid any more confusion, that's most likely what I'll do, so am I correct in assuming that I'll need an extra channel for "arming" or is that something that's located on the Tx side of the system?, I'm so used to fixed wing that "channel" is English and...

Ugh, Sounds a bit complicated to me, I'm leaning more and more toward another micro Rx, any suggestions for that?, say something that will be sufficient for the FC that I'm using and compatible with a Spektrum TX... Thank you for all your help Dan ~Biker

Hi Dan, Ok, I'm trying to understand this, "uart 1 and 2", AKA Rx1 and Rx2"?? I can easily remove pins on the DS2500, but I'm at a loss in terms of which channel to use on the Rx to go to the FC, I already have a set of pins on the FC for the ESC outputs (Ch1 - Ch4). I'm a bit confused

Hi Dan, I was just thinking that the channels 1-4 were just the same as a normal Rx, here's some of the specs on it that I was able to track down. Item Name: 2.4G mini receiver Channel: 4CH Weight: 2.2g Resolution: 1024 PWM Output: Yes Operating Voltage: 3.5-10V Current: 50MA Would it be...

Hi all, I know there are some scratch build gurus in here and if you are one of them, perhaps you could possibly help this total noob out here, after all these years messing with fixed wing aircraft, I decided to try my luck at a scratch build drone in order to learn more about them, I've also...