Recent content by Msteele260

Well it should because I got both of those from my local hobby shop... I’ll probably just take it in and have them figure this out

They go to 1500

The serial base and spektrum 2048. When the drone and the Tx are both on the end points go to 988 and when I pull the battery off the drone the end points go to 1500. When I first got the Rx and Tx I would power up the Rx and it has an LED light that would flash, and now that I have it bound the...

So i just noticed when I go to the Recivers tab and have my Tx and my Drone powered up, the 3D model is spinning all over the place and all the end points go to 988... Idk if that info will help you.

Well i switched the plug on my Rx to BND and that didn’t work. And yes I have Serial Rx turned on for UART3.

Here’s a picture, propably won’t be responding right away, about to head into work... the only thing different about yours is your white wire it looks like... I can’t tell where it’s going, but my white wire is in the Rx in UART3

It’s connected to PPM, But I have that cable that came with it plugged in but have the signal wire soldered into the Rx and the power and ground is still hooked up to the plug ... I’ll have to take a picture later if you need it, I’m not home right now and will be a while till I can And I have...

Well I’ve tried pretty much all of them and, nothing is working...

went out and bought a new transmitter Spektrum DX6E and reciver AR610 for my wizard x220... I got the transmitter and reciver to bind together, but when I try to get the transmitter to respond with the drone, nothing works... I can’t seem to figure it out and I can’t find anything on google...

Hey sorry to bring this back up, I'm finding the same ESC's but there different names, if I buy 4 new ones that aren't the same as the ones I have, will I have to program them to the drone or can I just put them on and go??

thanks for the info! I've been waiting for 3 days for banggood to respond, and still haven't heard anything... what are some good websites that I can buy the ESC's from? Preferably in the US and not China lol

Ok so I'm new to this. I made a terrible mistake on buying the eachine wizard x220... got it last weekend opened it up and started setting it up, went to test the motors and 3 out of the 4 motors were spinning... took it to a local hobby shop in town and the guy said my ESC was burnt out...