Am I using the right parts?

Alaska0124 · Sep 16, 2018

I'm still pretty new to drone racing but I have been flying quads for the past 10 years.
Anyways, I'm looking at building a race quad and want to make sure all the parts im using are compatible
and there's nothing that I'm missing.

Parts list:
Transmitter- FlySky-i6-FS-i6-2_4G-6CH-AFHDS-RC-Transmitter-Without-Receiver
Receiver- FlySky FS-R6B 2.4Ghz 6CH AFHDS Receiver
Frame- HSKRC TWE210 210mm Wheelbase 4mm Arm 3K Carbon Fiber
ESC- Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
Motors- DYS Samguk Series Wei 2207 2300KV 2600KV 3-4S Brushless Motor
Video Transmitter- Matek 5.8G 40CH 25/200/500mW switchable Video Transmitter VTX-HV with 5V/1A BEC Output
FPV transmitter- Eachine TX5258 5.8G 72CH 25/200/500/800mW Switchable FPV Transmitter Support OSD Configuring Smartaudio
Camera- Foxeer Arrow Micro V2 2.1mm 600TVL 150 Degree 1/3 CCD IR Blocked FPV Camera w/ Upgraded OSD 5.5g
Goggles- Eachine VR006 VR-006 3 Inch 500*300 Display 5.8G 40CH Mini FPV Goggles Build in 3.7V 500mAh Battery
Battery-ZOP Power 14.8V 2000mAh 4S 65C Lipo Battery XT60 Plug

If I am missing anything please let me know, like I said I am still pretty new to racing and haven't build a quad yet.

VirtueViolater · Sep 16, 2018

Just the opposite, you have listed two vtx's

Alaska0124 · Sep 16, 2018

Any recommendations on which one to stick with?

VirtueViolater · Sep 17, 2018

I haven't used either but both look good

RENOV8R · Sep 17, 2018

Nothing wrong with building a race quad with a budget in mind, components will work well together and you'll have a nice flying craft. The only thing I can suggest is don't cheap out on the batteries. The internet forums are loaded with ZOP lipo horror stories.