Hello, I have an axis flying c35 device and it uses DJI o3. I want to use DJI goggles 3 and DJI RC 3, but the elrs receiver came on the device, I removed the receiver and plugged the yellow Sbus cable onto DJI O3, but I still cannot get any response from the remote control, the image comes to the glasses, but I cannot control it from the remote control. Please help
Axis flying c35 ( Dji O3 + googles 3 ) + (Dji O3 + RC3) Please help
- Thread starter Yigit Aydin
- Start date
-
- Tags
- dji o3 air unit
Did you upgrade the firmware of the Goggles 3 and RC3 to latest? Did you set the receiver type to SBUS in the drone's flight controller?
Yes, I updated both devices and selected the receiver type as sbus. At the same time, I get another warning. I couldn't solve it completely. I load the Avatar O3 settings from the preset section, but I cannot clear the warning in any way. O3 unit connected to uart 6 on FC
Attachments
You have 2 things on UART6, that shouldn't be the case usually... What UART was the ELRS receiver connected to?
Similar threads
