Newbie here. On 2nd test flight in my yard I managed to flip the drone upside down and I guess the motors got stuck in the grass. The thing flamed in about 2 seconds. I am assuming the current draw just went through the roof.
On inspection the DJI air unit looks ok (but who knows), the flight controller boots in betaflight and seems to be responding. But the motor controller is obviously flamed. The capacitor and power leads unsoldered themselves as well as some of the motor wires.
Question is what to do now. No idea of how to check the motors, the air unit or what. My gut says just buy a new stack and rewire but if it ends up being the motors and the stack I wouldn't be against just buying another minus the air unit and use this one for parts.
Clueless...HELP!
On inspection the DJI air unit looks ok (but who knows), the flight controller boots in betaflight and seems to be responding. But the motor controller is obviously flamed. The capacitor and power leads unsoldered themselves as well as some of the motor wires.
Question is what to do now. No idea of how to check the motors, the air unit or what. My gut says just buy a new stack and rewire but if it ends up being the motors and the stack I wouldn't be against just buying another minus the air unit and use this one for parts.
Clueless...HELP!