- Joined
- Jan 29, 2018
- Messages
- 498
- Reaction score
- 510
- Age
- 64
I've been wanting to try an AIO FC/ESC/OSD for a while and with everyone doing super complicated builds and super lightweight builds, I thought I'd do a super simple build with a clean look and a minimum of parts.
I'm using my favorite frame the Lumenier QAV-XS, so even though there's a minimum of parts, it won't be a lightweight as the Lumi's got a fair bit of heft to it at 91 grams. Beautiful frame though with high-quality hardware and chamfered edges.The only downfall to this frame is that I really wanted to use the Runcam Split but it simply will not fit. Period. (No problem, just gives me an excuse for another build).
Any how, parts are as follow:
Lumenier QAV-Stretch X 220mm frame
Brother Hobby R4 Returner 2206 2450 motors
Lumenier Asgard V3 AIO FC
Radiolink R6DS RX
IRC Tramp HV VTX
TBS Triumph Stubby VTX antenna
Runcam Swift 2 FPV Camera
RMRC Strix 5 X 4.5X 3 props

I'm using my favorite frame the Lumenier QAV-XS, so even though there's a minimum of parts, it won't be a lightweight as the Lumi's got a fair bit of heft to it at 91 grams. Beautiful frame though with high-quality hardware and chamfered edges.The only downfall to this frame is that I really wanted to use the Runcam Split but it simply will not fit. Period. (No problem, just gives me an excuse for another build).
Any how, parts are as follow:
Lumenier QAV-Stretch X 220mm frame
Brother Hobby R4 Returner 2206 2450 motors
Lumenier Asgard V3 AIO FC
Radiolink R6DS RX
IRC Tramp HV VTX
TBS Triumph Stubby VTX antenna
Runcam Swift 2 FPV Camera
RMRC Strix 5 X 4.5X 3 props

