- Joined
- Jun 22, 2020
- Messages
- 176
- Reaction score
- 132
- Age
- 43
Dusted off an old ZMR250 frame and decided to set to work on modernizing. Wanted to get it in the air with a half decent setup for around £100 so settled on the following:
CaddX EOS Turbo
DYS BE1806 2300KV
SucceX 30x30 Full F4 Stack with Force 800mw VTx
Crossfire Nano
Vifly Buzzer
Had to find some TPU mounts for FPV cam & XT60/VTX mounts which I found. Decided to use racewires as well for easy motor swap outs.
I've managed to install motors, wires, ESC and FC today and get it powered up with no smoke. Have just flashed ESC firmware to Jazz Mavrick 16.73 and confirmed Bi-Directional DSHOT300 is working just fine.
Next steps to install the Xfire nano, cam, Buzzer and VTX and I should be in good shape for a maiden flight.
Here are my pics so far
CaddX EOS Turbo
DYS BE1806 2300KV
SucceX 30x30 Full F4 Stack with Force 800mw VTx
Crossfire Nano
Vifly Buzzer
Had to find some TPU mounts for FPV cam & XT60/VTX mounts which I found. Decided to use racewires as well for easy motor swap outs.
I've managed to install motors, wires, ESC and FC today and get it powered up with no smoke. Have just flashed ESC firmware to Jazz Mavrick 16.73 and confirmed Bi-Directional DSHOT300 is working just fine.
Next steps to install the Xfire nano, cam, Buzzer and VTX and I should be in good shape for a maiden flight.
Here are my pics so far