Recent content by Rosssiiii

Hello :) at moment i have 3 x 4s battery ovonic 1550mah 80c. but i will change engines on my drone and i will put engines that at full throttle will use 43a for single engines. at moment my battery can give maximum 124 A; while engines could arrive to use 172a; so with these battery i can't...

Hello guys :) i would like to ask how is possible to protect esc on eachine wizard v2 ? are there alternative to the use of broke propellers ?

Hello :) i open that discussion because i have to replace the motors in my eachine wizard x220 v2 but i want to know what i will need to complete the operation in fast way. 1) a soldering iron ; 2) i have to remove that tape () and i think i will need other like that, what kind of tape is...

i think is more safe have a buzzer that sound when battery is unplugged or lost signal and that i can let sound even with a switch. but but physically i don't know where to place it on my drone, wizard x220 v2. on official website of eachine is indicated : F405 DJI DUAL BEC V1 Flight Control...

How much more expensive is that ? Can be good and trusted even the basic version ?

Hello :) i would like to install a gps and buzzer on that drone but i don't know what model of gps buy and where to put ?

do you think i should consider the more premium version ? what change ? if you find on bangood or aliexpress link me that please :)

In the end analyzing all the engines I think is much safe replace all them because even if In different way are all broke, there is a mark on the copper 😏 I will replace engines with these: ]4 PZ iFlight XING-E Pro 2207 2450KV 2-4S motore senza spazzola per RC FPV Racing Drone Parti RC from...

Hello after had some issue with screws, solved today i continued to see some other vibration so i thought it was necessary to better tighten the screws on the motors. i did but this afternoon when i tried to fly with the drone is been impossible ! the propellers spin strangely, and something...

Hello :) i don't know why but today i had again some vibration and i see that screws are again unscrew even though I screwed them some days ago, after that i did 5-6 flights with a bit of freestyle. 1) Is it normal for the screws to loosen so quickly? on my drone i have 3 different kind of...

ok, thanks :) when battery are full charged i noticed that the resistance between the cells of the various batteries varies from 4 to 8 :dodgy: 1) what about the resistance, is it certainly a parameter to consider ? 2) when battery charger completed the process and back in standby can i...

yesterday i used battery ending at 3.6-3.7-3.8v but today i find some difference in voltage per Cell: expecially the A battery have difference, maybe is the case to go in STOCHG mode and after do a charge ? battery is not damaged

I thought that to reduce the engine power it was better to act on "motor output limit" as i circled in the first screenshot. throttle limit to me, looks like i'm going to act only on the throttle curve and it is the same thing that can also be done on the radio right ?

So i have to select scale and 85% to say that had to reduce the ammount of throttle ? but what is the difference compared to acting on motor power limit? i tought that was better doing that on motor output limit to reduce the power.

Hello today is just arrived that product, i would like to ask some info to see if i'm doing all well to charge my lipo battery Ovonic 1550mah 4C. cells i let work in auto, because in manual it let me decide to use only 1or 2 S. as Amper i have selected 1.5a : because unluckily don't let...