- Joined
- Nov 1, 2018
- Messages
- 746
- Reaction score
- 1,139
- Age
- 41
3" Hyperlight Toothfairy
Emax 1408 RS @ 2300 kv
AK32 mini 4in1 35 amp
Talon F4
Gemfan 2.5/4/3
Ducts by Stan FPV. They were $42.99 for a set of 5 printed ducts with a removable cover. It's a steep price, but they did come with a few sets of hardware, assuming you'd need a longer motor screw to use them properly. They also come with a few options for vibration dampers, and a set of HQ 2.5/2.5/3
My rig would not fly with the included HQ props. With the Gemfans I'm hovering around 60% with the gorpo mounted, but that's on a 1250 mah 5s. The motors are really tuned for 6s, but it's hard to find 5s and 6s that are under 1000 mah, and have an xt60. A smaller battery is going to help.
GoPro7 is on the way, footage will come shortly after
Emax 1408 RS @ 2300 kv
AK32 mini 4in1 35 amp
Talon F4
Gemfan 2.5/4/3
Ducts by Stan FPV. They were $42.99 for a set of 5 printed ducts with a removable cover. It's a steep price, but they did come with a few sets of hardware, assuming you'd need a longer motor screw to use them properly. They also come with a few options for vibration dampers, and a set of HQ 2.5/2.5/3
My rig would not fly with the included HQ props. With the Gemfans I'm hovering around 60% with the gorpo mounted, but that's on a 1250 mah 5s. The motors are really tuned for 6s, but it's hard to find 5s and 6s that are under 1000 mah, and have an xt60. A smaller battery is going to help.
GoPro7 is on the way, footage will come shortly after