Hello everyone! I am new to FPV I have a Protek25 drone, Fat Shark HDO3 goggles and a RadioMaster Zorro ELRS. Im trying to bind my googles to my video transmitter. I press the small button on the drone which gives a solid red LED. I then press the bind button on the goggles, in which the goggles continue to beep without binding. Also when the drone is on the two LEDs at the rear are orange. Im not sure if that's the default color and if it indicates anything. I read that the the video transmitter must be analog. How do I verify this Ive bought the drone sometime ago I can't remember what option I chose.
Binding help
- Thread starter nkit96
- Start date
- Joined
- Sep 1, 2022
- Messages
- 198
- Reaction score
- 98
- Age
- 67
- Location
- Birmingham, Alabama, USA
- Website
- digitalphotocreations.co
Greetings from Birmingham Alabama USA, welcome to the forum! We look forward to hearing from you!
I figured out the problem my version uses the Caddx Polar Vista Digital HD System. This VTX doesn't work with the Fat Shark goggles. Is there an easy way to just replace the VTX or would I be better off buying a new drone or goggles?
Unless you're wiling to essentially rebuild, i.e. de-solder & re-solder to the AIO flight control board to install a new VTX, you will need either an analogue version of the drone or a set of DJI goggles. Any of their 4 sets, V2s, Goggles2, Integras or Goggles3 can work. The older V2s would likely be the least expensive & most readily compatible. I fly my Protek25 with the
goggles Integra but I had to update the firmware on the Vista to do it, making it incompatible with older goggles.
goggles Integra but I had to update the firmware on the Vista to do it, making it incompatible with older goggles.
