Eachine VTX03 with VR007 goggles no picture

[VirtueViolater]

If i were you, I'd get a switcher, 25, 200, 600 mw vtx. I like the AKK switcher with the whip. With the switcher, you can blast 600mw when alone for great video or run 200 mw for races etc. I haven't had much luck with the Eachine vtx's

 

[VirtueViolater]

it's kind of fun seeing smoke come out of your electronics lol.

Ahhh, the lingering smell of burnt electronics.....brings back memories....lol

 

[Solly747400]

If i were you, I'd get a switcher, 25, 200, 600 mw vtx

Never heard of it. Got a banggood link?

 

[VirtueViolater]

Try swapping between Pal and NTSC signal on your goggles. I had that same thing when I first powered up my Eachine VR011 goggles.

Didn't think of this,... this will probably fix it

 

[VirtueViolater]

This is the one i use, Bangood should have them. AKK makes several, may have to try to find the one you need
https://www.amazon.com/gp/product/B01N948FF7/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

 

[VirtueViolater]

Bangood doesn't have them, just looked. I use Amazon, sorry

 

[VirtueViolater]

I have one of these, its good
FT48X 5.8G 48CH 0.25/25/200/600mW Adjustable Video Transmitter VTX Raceband For FPV Racer RC Drone

 

[Solly747400]

Cool. I just found the vtx03 on gearbest for AU$11.50 so i bought 2. Hehe bargain I reckon.

 

[Solly747400]

Try swapping between Pal and NTSC signal on your goggles. I had that same thing when I first powered up my Eachine VR011 goggles.

Hey Fargo, Are you able to tell me how to change from NTSC/PAL on the goggles? I can't seem to find anything in the 'MODE' menu or anywhere else. I'm obviously not looking in the right place

 

[Wayno52]

Solly, where are you in Aus ? I get all my gear from Grant at Buzz Hobbies he is amazing . Super fast shipping and price is good. I’m only about 15 minutes from him in Perth and I now pick everything up. Great guy and service. Worth a look

 

[Solly747400]

I'm in SA. Renmark to be specific

 

[fargo252]

Hey Fargo, Are you able to tell me how to change from NTSC/PAL on the goggles? I can't seem to find anything in the 'MODE' menu or anywhere else. I'm obviously not looking in the right place

I’m not sure how you get to that setting off the top of my head but it was in the manual for my goggles.

 

[Solly747400]

I’m not sure how you get to that setting off the top of my head but it was in the manual for my goggles.

Cool thank you

 

[Solly747400]

I just checked my manual and it says nothing about NTSC/PAL, weird

 

[Wayno52]

Cannot change on vr007.

 

[Solly747400]

Cannot change on vr007.

I was starting to think that, thanks. So this would not be the problem why i have almost 100% snowy picture I'm guessing

 

[Wayno52]

No not at all. There is an issue somewhere just not sure where. Have you tried changing channels on your vtx?

 

[Solly747400]

No not at all. There is an issue somewhere just not sure where. Have you tried changing channels on your vtx?

Many times. Changes channels, band and power settings with no change

 

[VirtueViolater]

Read up on your fpv cam and figure out how to switch pal/ntsc on it

 

[Solly747400]

Read up on your fpv cam and figure out how to switch pal/ntsc on it

Will do thanks