Eachine wizard x220 help

[Thorndrone]

Having trouble getting my new drone to start. Anyone know which pin on FSIA6B connector do I use? I’m not using the IBuS connector. Thanks in advance for any advice.

 

[tevek]

Like this? Plugged into the PPM port and also PPM switched on in the tx.

 

[cor]

Not sure if this helps but have you flashed the FC and put betaflight on it, my drone was having trouble with connection. After I did this and set the board orientation to 270 it took off, then I crashed.

 

[NeoCloneOne]

Use FC board orientation at -90 degrees yaw offset. That seems to work fine.