I just built my first FPV drone with CL_RACING F4S AND FRSKY XSR. And my controller is not working. I included what I have done below. After doing all this, when I move my controls on my Taranis radio, nothing is being received by betaflight. Please help.
(Wired)
1) SBUS From XSR to SBUS on CL_Racing F4s FC
2) Smarport from XSR to TELE on CL_Racing F4s FC
((( BETAFLIGHT )))
(PORTS)
1) UART1 set serial RX on
2) UART3 set Telemetry output to Smartport
(CONFIGURATION)
1) set RECEIVER MODE to Serial Based receiver
2) Set Serial Receiver Provider to SBUS
(RECEIVER)
1) Channel map set to FrSky
(Wired)
1) SBUS From XSR to SBUS on CL_Racing F4s FC
2) Smarport from XSR to TELE on CL_Racing F4s FC
((( BETAFLIGHT )))
(PORTS)
1) UART1 set serial RX on
2) UART3 set Telemetry output to Smartport
(CONFIGURATION)
1) set RECEIVER MODE to Serial Based receiver
2) Set Serial Receiver Provider to SBUS
(RECEIVER)
1) Channel map set to FrSky
