I removed my fpv camera because???
- Thread starter broncosdad1317
- Start date
theGreenOrange
Well-Known Member
So I would need a right hand on the vtx as well as both rh on my goggles. I was gonna run a foxeer or aomway and a immersion rc patch
Futuramille
Well-Known Member
- Joined
- May 27, 2017
- Messages
- 1,664
- Reaction score
- 2,055
- Age
- 60
- Location
- Florida USA
- Website
- www.youtube.com
Futuramille
Well-Known Member
- Joined
- May 27, 2017
- Messages
- 1,664
- Reaction score
- 2,055
- Age
- 60
- Location
- Florida USA
- Website
- www.youtube.com
Futuramille
Well-Known Member
- Joined
- May 27, 2017
- Messages
- 1,664
- Reaction score
- 2,055
- Age
- 60
- Location
- Florida USA
- Website
- www.youtube.com
that patch, with a blacksheep clover leaf provides great diversity through the furious FPV True-D unit. I'm happy. the fatshark is just a viewer. IMO quality comes from these plug in units on FS or what ever is built in to other units. 
i just keep the firmware updated.. the latest update was like a whole new furious module.
just remember, no matter what you get, 5.8ghz does not penetrate water so there's always going to be some interference as you fly behind stuff. that's where onboard dvr (gopro etc) comes in but that's just a recording.
watch mr steels vids with inlay of his view.
i just keep the firmware updated.. the latest update was like a whole new furious module.
just remember, no matter what you get, 5.8ghz does not penetrate water so there's always going to be some interference as you fly behind stuff. that's where onboard dvr (gopro etc) comes in but that's just a recording.
watch mr steels vids with inlay of his view.
Word. Just watched a comparison video by bardwell and the triumph did not do too great. Which was surprising. The foxeer and the aomway did the best but the patch I already ordered along with two aomway 
So I just got the red ones in. Are they both rhcp or lhcp. Also my immersionrc patch does that need to be the same as the two aomway? They say their omnidirectional is that diff from rhcp or lhcp
VirtueViolater
Well-Known Member
theGreenOrange
Well-Known Member
An omni-directional antenna receives signals from all directions (except directly from the bottom). Basically all antennas except patch antennas (directional) are this way.
It is not related to polarity. A signal can be polarized either left hand or right hand. When a signal bounces off a surface, the polarity is reversed. So using two RHCP antennas will help reject reflections, which will be LHCP. A dipole antenna will receive either polarity.
It is not related to polarity. A signal can be polarized either left hand or right hand. When a signal bounces off a surface, the polarity is reversed. So using two RHCP antennas will help reject reflections, which will be LHCP. A dipole antenna will receive either polarity.
DavidKersting
Well-Known Member
I have way more cash sunk into goggles over 1 yr than the $$ sunk into 20 years of the thing that actually goes up in the air.
True to personal choice. Some hobbie stores will let you see some differences before you buy. Alot of money gets wasted in buy,,,,then buy again,,,,then buy again. Good luck.
True to personal choice. Some hobbie stores will let you see some differences before you buy. Alot of money gets wasted in buy,,,,then buy again,,,,then buy again. Good luck.
VirtueViolater
Well-Known Member
So my goggles say rp-sma ports. My aomway are rpsma but my immersion rc patch antenna is sma. Does that mean I Can't use it
also the adapters for it so I can mount it to my goggles say their also sma so how do I get this to all work?
This is what I got let me know if that will all work and if not what I'd need to make it work please I would appreciate it a lot friends here's my goggles my goggle and quad antennas patch and omnidirectional. The aomway don't say what polarization they are
Attachments
