Can't Plug Antenna into VTX

[Eachine98379872]

I had to replace my VTX on my Eachine Wizard X200s because of a big crash. It came with a new cable that connects the VTX to the antenna however I cant make the connector stay in on the VTX side. I've added a photo its the connector thats gold that I'm on about. What am I doing wrong?

This is a link to the VTX: Eachine Wizard X220HV FPV Racing RC Drone Spare Part 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable

 

[Tomk_]

Looks like you just need to push the male mmcx into the socket all of the way. You'll need to get it perfectly square to the socket for it to push in.

 

[tevek]

As mentioned above, just make sure it is perfectly square and push it all the way in.

 

[Eachine98379872]

I tried that but it still keeps falling out. It doesn't feel like its locked in or anything at all - theres literally nothing to stop it coming back out.

Cheers

 

[Tomk_]

Then you aren't pushing it in far enough. It should "click" into place and then it won't fall out.

 

[Tomk_]

I suppose you could be pushing it in all of the way but the ring is compressed and doesn't hold. (It looks like it should be OK in the picture). If that is the case... you might try this: