Hi all, so I'm having problems with my fpv video. This is my first time fpv.
The camera I use is a 2.3mm 700TVL 1/3 CMOS for the Eachine Wizard X220 quad.
The VTX I use is the Eachine TX526
The googles I use are Eachine VR006.
For the camera i selected 5V and the VTX I chose VCC.
I use a 4s battery
I did all the souldering and checked if it was correct.
The quad flys well I however no fpv.
I've tried to attach a photo of my picture display, it has colour however I am stuck with horizontal statixc lines. If i reconnect the camera when powered on a few times it will work and get a good picture, however if i power on off again by unplugging thr battery it will revert back to horizontal static.
What would be the reason for this? Thanks
The camera I use is a 2.3mm 700TVL 1/3 CMOS for the Eachine Wizard X220 quad.
The VTX I use is the Eachine TX526
The googles I use are Eachine VR006.
For the camera i selected 5V and the VTX I chose VCC.
I use a 4s battery
I did all the souldering and checked if it was correct.
The quad flys well I however no fpv.
I've tried to attach a photo of my picture display, it has colour however I am stuck with horizontal statixc lines. If i reconnect the camera when powered on a few times it will work and get a good picture, however if i power on off again by unplugging thr battery it will revert back to horizontal static.
What would be the reason for this? Thanks