Symptoms:
Powered on there are no beeps at all (with motors connected).
Connected to usb, the FC is seen and can be flashed.
Using esc-configurator or BL configurator no ESCs are seen.
Troubleshooting done so far:
Disconnected all wires to eliminate possibility of something being shorted.
Powered up flight controller.
Checked for power at all motor pads and all report 0 Volts.
I'm not sure which chips are the FETs and exactly how to test them. I have experience replacing smb components so that doesn't worry me, just identifying the right components to place is my problem.
Any assistance would be greatly appreciated. I've been trying to get this up in the air for my son and about to pull the rest of my hair out.
Thanks,
Jason
Powered on there are no beeps at all (with motors connected).
Connected to usb, the FC is seen and can be flashed.
Using esc-configurator or BL configurator no ESCs are seen.
Troubleshooting done so far:
Disconnected all wires to eliminate possibility of something being shorted.
Powered up flight controller.
Checked for power at all motor pads and all report 0 Volts.
I'm not sure which chips are the FETs and exactly how to test them. I have experience replacing smb components so that doesn't worry me, just identifying the right components to place is my problem.
Any assistance would be greatly appreciated. I've been trying to get this up in the air for my son and about to pull the rest of my hair out.
Thanks,
Jason
