help

hi this is my 1st fpv drone build and i am having some issue with motors/ esc. i mounted a Matek AIO F4 Flight Controller + PDB 4*30A + Bateflight OSD, motors Emax RS2306 - 2400KV, esc T-MOTOR F30A ESC-BLHeli 32BIT-2S-4S - DSHOT 1200 the reciever bind, i have the video on goggles, plugging the...

Hi, Im doing a project for school where im building a (budget) drone. We've done quite some extensive research about all the parts and which parts we should get. We think we have our final parts list. The thing is we are scared that some parts might not be compatible with other parts. We have...

ok so this is my first time building a racing drone and i made a mistake buying the receiver/remote so i got the flysky i6 controller and with the flysky ia6 receiver not the ia6b receiver the one i bought is using either ppm or pwm and while my fc (which is the seriously pro racing f3 flight...

Hello everyone! I thought of making my first drone for a while now. I have small experience with rc cars, and electronics but nothing like FPV drones. My questions are : 1.what do you think are the best buget components . I think i need: Frame,camera,esc's,propellers,motors,transmitter and...

Hey guys! My name is Jin, I`m here from Hiroshima, Japan. I recently bought a Eachine Wizard x220 ARF, and am having a multiple of issues....escpecially with software and driver problems. I own a 2011 Macbook Air (HighSierra) and have a FLY SKY FS-i6 transmitter. Problems: 1. I wanted to...

So I've been flying for about a year and I am an addict. Hi, my name is Ron and I am addicted to FPV...... I started with a Wizard x220 and now the only thing left of it is the frame, sort of. I've replaced everything on it including the frame. Ive built 3 other quads from the ground up and...

Hey guys, I am in some need of some help. way back in christmas, I got the kingkong 210gt from hobbyking, but I received a DOA drone, I contacted Hobby King, but they said that they could not replace it because they were out. So we got our money back, and I purchased the parts parts for...

hello, I'm new here. I have a JD 590 drone and am have trouble linking it to a Goourc vr hd01 headset. I've had both a while but never used the headset. because they don't come with batteries and the instructions seem to be written in some sort of hyogriphics or other strange long dead and...

Hi all So i really want to get into fpv (not reacing) and i like to hear some recommendations frome you! Im not into racing so i want a long flight time (big battary) + a long range one Is there a good starter kit? (drone+controler+FPV Glasses) what is the average run time for adrone? what is...

i cut the long cable of my receiver specktrum ar610. (Like in the first 1/3 of the cable)

I've setup using a config from this site, updated firmware to F4 and setup propellers in Quad X 1234 config and its not taking off please help!

I just bought a torrent 110, and it has a dsmx receiver. I have a Taranis QX7 with an ORX module. I am having trouble binding the 2. This is also my first bind. I have watched several videos on binding, but I can't seem to get it right. Pleeeeeasseee help!

G'day fellas, New to FPV and these more advanced drones in general. Thought I'd make the upgrade from flying toy quads around the house to a more outside immersive version. That said, I need help in choosing which Bflight 210 version to get, and what controller to get alongside with it. As...

Hi everyone. I have tried many time by following this video : (an the manual of the board) to make a single servo gimbal on my naze 32 acroflight rev6 I checked the box for the servo gimbal, but when i connect the servo to pin 1 it goes full on way(and eventually get hot) and i lose one...

Ok so I'm new to this. I made a terrible mistake on buying the eachine wizard x220... got it last weekend opened it up and started setting it up, went to test the motors and 3 out of the 4 motors were spinning... took it to a local hobby shop in town and the guy said my ESC was burnt out...

Went to the park to do some casual flying today but when I plugged my lipo to my Drone I saw smoke coming in between the Powerboard and the Flight Controller. I can arm and disarm it and basically do every directional control I wanted but the only problem was the receiver wasnt turning on and I...

Im very new into the quadcopter hobby but theres always been a question that lingered my mind when I built my first two drones: does a receiver with two antennas have a better range than a reciever with one?

Racerstar RS20Ax4 V2 20A BB2 48MHz Blheli_S 2-4S 4 in 1 Opto ESC Support Oneshot42 Multishot 16.5 Dshot600 Sale - Banggood Mobile AliExpress Mobile - Global Online Shopping for Apparel, Phones, Computers, Electronics, Fashion and more

I've been flying Dji phantom drones 1-4.. but just decided to jump into the racing FPV world.. I pushed out the boat and got what I thought would be an "everything you would need to get started with room to expand.." kit.. The "Force 1 FPV 220 RTF Racing Kit." For the life of me I can't get...

i am building a micro that can run on 4s. I bought the xjb v2 aio fc, pdb, and esc, and an fs a8s receiver to go with it. The fc doesn't have ibus, it just has sbus and ppm. I have a flysky fs i6 that only runs on ppm and ibus, i think. Can I run on ppm? I heard it is not that great, but it's...