- Joined
- Jul 16, 2017
- Messages
- 32
- Reaction score
- 10
- Age
- 47
- Location
- rome italy
- Website
- www.youtube.com
hello guys.. I start with the picture and then I explain :
in these 2 first flights I understood how difficult (and different from my mavic) a fpv drone is.. i've been doing baby steps but is hard to tame that thing!
today I was learning how to throttle without going up to the moon and without hard drop it on the ground! it did fell many times and actually on the less hard impact front right motore went off cutting those cables that connect "leds"!
now the QUESTIONS
1) I noticed(and that gave me some troubles) that as soon as I'd give throttle the quad would move backward (slowly but still...) shouldn't it just go up? right stick was in the middle(always) might be some sort of bad calibration? if that moving backwards isn't normal(no touching right stick) how can I check over betaflight?
2)I've lost screws on that motor.. probably screws where not tight enough.. do you check screws before every flight? with loctite they would stay on, no need to check?
3) how do you take your drone to the field? I come fromavic experience.. it fold itself so easy to bring anwyeh5.. but wizard x220s and fpv quads generally are not foldable...
4) do you keep props on from home to the place where you'll fly?
I know many questions.. probably I need to buy a solder and learn to use it lol.. which solder?
thanks to every kind heart willing to teach a noob
Sent from my BLL-L22 using Tapatalk
in these 2 first flights I understood how difficult (and different from my mavic) a fpv drone is.. i've been doing baby steps but is hard to tame that thing!
today I was learning how to throttle without going up to the moon and without hard drop it on the ground! it did fell many times and actually on the less hard impact front right motore went off cutting those cables that connect "leds"!
now the QUESTIONS
1) I noticed(and that gave me some troubles) that as soon as I'd give throttle the quad would move backward (slowly but still...) shouldn't it just go up? right stick was in the middle(always) might be some sort of bad calibration? if that moving backwards isn't normal(no touching right stick) how can I check over betaflight?
2)I've lost screws on that motor.. probably screws where not tight enough.. do you check screws before every flight? with loctite they would stay on, no need to check?
3) how do you take your drone to the field? I come fromavic experience.. it fold itself so easy to bring anwyeh5.. but wizard x220s and fpv quads generally are not foldable...
4) do you keep props on from home to the place where you'll fly?
I know many questions.. probably I need to buy a solder and learn to use it lol.. which solder?
thanks to every kind heart willing to teach a noob
Sent from my BLL-L22 using Tapatalk